VENTRA XDR-1280/D, User Manual

Page: 41 / 48

Alarm – Base Configuration
41
6.2 Alarm – Base – I/O Alarm
Enable / Disable I/O Alarm trigger 1 - 8
Alarm Type
: Important or General
Trigger : Low or High trigger (Default is Low for alarm trigger)
For Sensor In: For Sensor Out:
High Voltage: 5~12V Triggered Voltage: 12V
Low Voltage : 0~2V Default Voltage: 0V
Alarm Linkage :
Channel : XDR supports multiple cameras to be assigned for recording when
specific alarm is triggered
Post Recording: Duration of recording to be marked as post alarm event
Lock: Lock specific alarm recording to keep for specified duration – refer to
section 4.3 General > Surveillance > Record > Lock Duration days 1 – 31 days
3G: Applicable only for the XDR-580H
Linkage Output:
1 or 2 – Enable link alarm output when alarm is triggered
Output delay Time : alarm output duration after alarm is removed 0 – 255 secs
Alarm upload: Enable to upload to platform (Only on XDR-580)
Linkage screen: Link channel to show full image when alarm is triggered
PB alarm duration: Available alarm duration after urgent alarm is removed
Alarm snap: Enable to link image snapshot