Electric TV Lift, TS600B
11
8. RF/IR remote learning
If the control box does not respond when pushing the emitter buttons, they need to be paired.
o
Push the Learner button on the control box for less than 1 sec.
o
The red LED will turn on
o
Push one of the RF/IR emitter buttons
o
The red LED will start flashing
o
When the red LED stops flashing, the units now are coded together with a unique code
o
To abort a learning operation push the Learner button once more. The red LED will turn
off and the control box is back into normal operation mode.
9. Declaration of conformity
We hereby declare, under our sole responsibility that the following products:
-
VENSET TV-lift product type
TS600B
is in accordance with
-
Directive 2006/42/EF of the European Parliament and of the Council of 17 May 2006 on
machinery and on changes of directive 95/16/EF
With reference to the above please be aware that:
-
the TV-lift is considered a partly completed machinery and
-
the TV-lift may not be used until it has been assembled and installed
according to the instructions.
Manufacturer:
VENSET A/S
Industrivej 23
DK-6900 Skjern
Denmark
Tel: +45 9735 4611, Fax: +45 9735 4631
The information in this document is subject to change without notice.
