background image

19

FCC INFORMATION

Compliance with FCC regulations (Valid in U.S. only) This device complies with part 15 FCC rules. Operation 

of this device is subject to the following two conditions:

1.  This device may not cause harmful interference.

2.  This device must accept any harmful interference that may cause undesired operation.

This device generates and uses radio frequency energy and if not used properly may cause interference to 

radio and television reception. It has been tested and found to comply with the limits set by the FCC which are 

designed to provide reasonable protection against such interference.

FCC Warning:

CAUTION:  

 Venom™ is not responsible for any radio or TV interference caused by unauthorized modifications 

to this product. Changes or modifications not authorized by Venom™ will void all warranties.

NOTE:

  This product has been tested and found to comply with the limits for a Class B digital device, compliant 

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This product generates, uses and can radiate radio frequency energy 

and, if not installed and used as instructed, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this product does cause 

harmful interference to radio or television reception, which can be determined by turning the product on and 

off, correct the interference by trying one or more of the following measures:

-  Reorient or relocate the receiving antenna.

-  Increase the separation between the equipment and receiver.

-  Connect the equipment into an outlet on a circuit different from the receiver.

-  Consult the dealer or an experienced radio/TV technician for help. 

FCC# 

XXXXXXXXXXXXX

Venom™ Limited Warranty

Venom™ warrants this product to be free of material and workmanship defects when new. If a component 

is defective or was not correctly made, Venom™ will, at its sole discretion, repair or replace it free of charge 

within 90 days from date of purchase. If you believe a defect became evident only after operation, please 

contact us to discuss the situation.

A dated & itemized sales receipt must accompany any product returned for warranty work. Before returning 

any product, please contact Venom™ Customer Service at 800-705-0620 to receive a Return Merchandise 

Authorization Number (RMA#).

We guarantee this product to be free of manufacturing faults and material defects. This product has been 

checked and adjusted individually before leaving the manufacturer. Please contact your local hobby shop 

for  replacement  parts  and  technical  support  or  contact  Venom™  Customer  Service  at  800.705.0620  or 

[email protected]

Summary of Contents for VEN-8181





















Reviews: