5
2.6 FUNCTION / TH. CURV (THROTTLE CURVE)
THROTTLE CURVE (TH. CURVE) - The Throttle Curve feature changes the response of
the throttle and the brakes. There are three different throttle curve types; EXP, VTR and
CUR.
NOTE:
The
EXP is the only selection that creates an exponential curve for braking.
EXP Curve
This feature is a simple exponential curve. Using the EXP feature will help smooth your
throttle response for vehicles with a touchy throttle.
1) Select
EXP
for the throttle curve mode.
2) Select the “R” (rate) to set the throttle curve rate by pressing ENTER
3) Use the (+) to make the throttle rate more sensitive. Use the (-) to make the throttle
rate less sensitive.
Brake Adjustments
This adjustment is the same for all three Throttle Curve types.
1) Select the BR setting with the ENTER button.
2) Use the (+) button to make braking more aggressive. Use the (-) to make the
braking more mild.
3) Press the EXIT button to return to the FUNCTION menu, and again to return to the
main screen.
CUR Curve
This feature has three adjustable throttle rate points through the throttle range that can be
independently adjusted.
1) Select
CUR
for the throttle curve mode.
2) Select the “R” (rate) to set the throttle curve rate by pressing ENTER. This will
highlight the (1) – First point.
3) Use the +/- buttons to adjust the first point.
4) Press enter to go to the (2) – 2nd point
5) Adjust the (2) point with the +/- buttons
6) Press enter and repeat for the (3) – 3rd point
7) Press enter and set the braking rate. Refer to the section on Brake Side
adjustments in the EXP Curve section.
VTR Curve
This Feature is enables the user to make throttle curve steeper (or milder) in a specific
range by allowing two different throttle curve rates by changing the curve switching point.
1) Change the Curve Switching Point (P) by using the +/- buttons.
2) Press ENTER to select the throttle rate. (R)
3) Use the (+) button to make the throttle response quicker. Use the (-) button to make
the throttle response milder.
4) Press EXIT to save and return to the FUNCTION menu. Press EXIT again to return
to the main menu.
1) Press
ENTER
to see the FUNCTION MENU.
2) Use the
+/- KEYS
to highlight TH. CURV and press
ENTER.
3) Press
ENTER
to select a setting.
4) Use the
+/- KEYS
to change the value.
5) Press
EXIT
to save and return to FUNCTION MENU, press
EXIT
again to return to the
Main Screen
