4
2.5 FUNCTION / ST. CURV (STEERING CURVE)
STEERING CURVE (ST. CURVE) - The Steering curve is used to change the sensitivity
of the steering servo around neutral without affecting the maximum servo travel. This
feature is helpful for taming down vehicles with sensitive steering. For new vehicles start
at 0% until the driving characteristics are known.
TERMS: LINE-LINEAR, EXP-EXPONENTIAL, M-MODE, L-LOW, H-HIGH, R-RATE
1) Press
ENTER
to see the FUNCTION MENU.
2) Use the
+/- KEYS
to highlight ST CURV and press
ENTER.
2) Use the
+/- KEYS
to change the setting.
5) Press
EXIT
to save and return to FUNCTION MENU, press
EXIT
again to return to the
Main Screen.
Note: Adjustment range is -100% ~+100%, default is 0%. For faster steering use the (+)
button, for slower steering use the (-) button.
2.4 FUNCTION / REV (REVERSE)
REV - REVERSE (REV) - This function is used to reverse the direction of movement or
action by a servo or speed control.
1) Press
ENTER
to see the FUNCTION MENU.
2) Use the
+/- KEYS
to highlight REV and press
ENTER.
3) Press
ENTER
to select a setting.
4) Use the
+/- KEYS
to change the value.
5) Press
EXIT
to save and return to FUNCTION MENU, press
EXIT
again to return to the
Main Screen.
TERMS: F-FORWARD, B-BACK, ST-STEERING, TH-THROTTLE, AUX-AUXILLIARY
