19
20. OPERATION
(
CONT
'
D
)
H
EAT
S
ENTRY
™:
The hood is equipped with a HEAT SENTRY thermostat. If blower is ON at a lower
speed setting and excessive heat is detected above the cooking surface, it turns
the blower up to third speed. When the temperature level drops to normal, the
blower will return to its original setting.
NOTE: When Heat Sentry is activated, the “DELAY OFF” function is inactivated.
WARNING
!
The Heat Sentry can change the speed of the blower when excessive heat is detected
above the cooking surface. If this situation occurs and you must stop the blower, press on
the third speed button or on the master ON/OFF button.
D. L
IGHT
B
UTTON
/B
ACKLIGHTING
C
OLOR
(D
OUBLE
F
UNCTION
B
UTTON
):
i. This button allows three different lighting levels according to your needs. Press once for full
intensity, twice for intensity level
2
, and once more for nightlight. To turn off the lights, press
once more.
If desired, when the lights are on, press and maintain the light button for 1 second; lights will
be turned off.
NOTE: When only the lights are ON to any intensity and no interaction with the hood is detected for
a 10-second period, the 7 buttons backlighting will fade to its low intensity, acting as a night
light feature.
ii. When lights are off, pressing and holding this button for 1 second will switch the backlighting
color from white to blue or from blue to white (default backlighting color is white) and
memorize it. The button will flash three times to indicate that the color change has been
made.
NOTE: Due to the particular sensitivity of the control interface, keep the glass panel clean as dirt
and condensation may cause erratic operation of the hood blower and/or lighting. If this
situation occurs, wipe the glass panel and wait 90 seconds. Then, adjust the blower and/or
lighting at your convenience.
