To replace bulbs:
1. Gently push upward and turn
counterclockwise to disengage bulb
leads from their grooves.
2. Place the new bulb leads into their
grooves in the socket.
3. Gently push upward and turn
clockwise until secured.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
- 14 -
2. Rest rear filters edge on filter springs in
the range hood. Using knob, tilt up the fil-
ters into position. Make sure filter tabs are
securely engaged in range hood front
edge after installation.
1. Using a Phillips no. 2 screwdriver, assemble
two knobs to each filter. The screws MUST
BE on filter tabs side. See illustration at
right.
10.REINSTALL BAFFLE FILTERS
HO0195
F
ILTER TABS
CAUTION
Remove protective plastic film covering filters before reinstalling them.
HO019
3
11. LIGHT BULBS
T
his range hood requires two 120 V, 50 W max., type MR16 with GU10 base, shielded halogen
bulbs (included).
WARNING
Do not touch lamps during or soon after operation. Burns may occur. In order
to prevent the risk of personal injury, only install shielded halogen lamps. Also,
never install a cool beam, a dichroïc lamp, a lamp not suitable for use in
recessed luminaires or identified for use in enclosed fixtures.
!
1
2
3
