1. Slide the upper flue up to the ceiling and secure it to
the ceiling mounting bracket using 2 no. 8 x 1/2"
quadrex screws.
NOTE: Ensure upper and lower flue seams are
aligned .
Carefully slide the lower flue over the upper flue up
to the ceiling and have the second person hold it to
the ceiling while performing step 2.
For each glass panel:
1. Remove glass panel from its packaging.
Remove glass panel nuts (factory installed) from both studs and set aside.
2. Insert glass panel studs in appropriate hood
holes (some parts not illustrated to ease
understanding).
NOTE: Install the glass panel with the control
pictograms on the front of the hood.
3. While holding glass panel, pre-tighten previously
removed nuts by hand. Ensure glass panel is
centered.
Then, using a 3/8" socket, tighten nuts completely.
8. INSTALL GLASS PANELS (
WG MODEL ONLY
)
The WG hood model glass panels are sold separately and have to be installed before completing
the hood installation.
HD0438
G
LASS PANEL
STUD
N
UT
1
2
HD04
3
5
- 12 -
CAUTION
DO NOT REMOVE the protective plastic film covering the decorative flue (upper
and lower) yet.
9. INSTALL HOOD
BE CAREFUL when installing the decorative flue and hood, they may have
sharp edges.
WARNING
!
1
2
