By default the Vengeance comes
loaded with all preset options. The
Default parameters are to be used
with standard PWM input receivers.
If you would like to use a PWM
or S.BUS style receiver you must
configure these settings yourself.
Receiver Mode: If you are using a
Satellite Receiver or PPM input you
may select the type of Receiver
here. For example: Spektrum PPM or
Futaba S.BUS.
By default the Vengeance is setup
to use standard PWM signal. The
user must use a 6Ch Transmitter to
utilize the Vengeances standard
functions ( 5Ch. Flight Mode
Selection, 6Ch. Gimbal Control)
"Serial Receiver Provider" option
allows you to select the type of PPM
(single-line) input Receiver you are
using.
If you edit the Receiver Input type
please make sure DO NOT ARM
motors until you have verified that
your "Channel MAP" corresponds to
your Transmitter. Failure to do so can
lead to possible bodily damage.
DO NOTE! You must "Save and
Reboot" to save changes onto your
flight controller.
11
Summary of Contents for HYPERION FPV RACER
Page 2: ......
