S T / V T V E N D O R
•
3 5 6 8 3 5 6 7 3 5 6 6 3 5 6 5
•
15
4 2 2 0 5 5 7 R e v A
SERVICE MODE FUNCTIONS
1
TUBE FILL/ DISPENSE COINS
Tube Fill counts coins as
they are deposited and
Shows the dollar amount.
Tube Dispense
Pays out coins from the coin
mech coin tubes.
This mode will also display
the current quantity of
coins in the coin mech
tubes.
TUBE FILL
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count 60
2.
Press
and begin depositing coins
At least 15 of each denomination
3.
Press
2 times to exit
(Sales Mode)
TUBE DISPENSE
STEP
DISPLAY
1.
Press
to dispense dollar coin
$1.00/coins
2.
Press
to dispense quarters
0.25/coins
3.
Press
to dispense dimes
0.10/coins
4.
Press
to dispense nickels
0.05/coins
5.
Press
2 times to exit
(Sales Mode)
Note
:
For dispensing more than a 4 denomination coin mech use keys greater in the same sequence as shown above.
2
MOTOR COUNT
Displays the total count
of working motors.
STEP
DISPLAY
1.
Press Service Mode Button
Motors ( - - )
2.
Press
then wait.
Motors ( - - )
3.
Press
to exit.
(Sales Mode)
3
OPTIONS
(See CONTROL SYSTEM Programming Manual for more information)
4
CONFIGURATION
(See CONTROL SYSTEM Programming Manual for more information)
4.0.0.2 AUTOMATED DELIVERY BOX
STEP
DISPLAY
1.
Press the ‘Service Mode’
button on the control board
(Motor Count)
2.
Press
Configuration
3.
Press
Password:
Configuration
4.
Enter Password (default 2314)
Advanced Config
5.
Press
Peripherals
* - exit