VendNet SM VI 3157, Service Manual

Page: 9 / 48

SM VI, 3157, 3158, 3159, P/N 4211051
7
COIN MECHANISM & BILL VALIDATOR
CAUTION:
Do not plug in or unplug the coin changer with the power on!
The controller will monitor the condition of the coin changer at all times. Any activity
(coins inserted) will be recorded and stored in the controller.
Removing Accepted Bills
Accepted bills may be removed by opening the “bill box” lid or by removing the bill box
from the validator. (See manual from validator manufacturer).
If the bill box is removed, make sure that it is fully latched in place when it is returned
to the validator.
Clearing Jams & Cleaning
Trapped bills, debris or dirt can result in poor bill acceptance or bill rejection. Remove
the bill box and lower housing to clear trapped bills or debris. Clean the bill path plastic
parts or belts with a cloth moistened with a mild soap and water solution. Clean the
magnetic head and optic sensors using a swab and isopropyl alcohol. (See manual
from validator manufacturer)
CAUTION:
Do not use any petroleum based cleaning solvents, scouring pads or stiff
brushes for cleaning.
LOADING PRODUCTS
To load products, lift tray slightly and pull
forward until the tray stops. The upper-most
trays will tilt for ease of loading.
Load products from front to back, making
sure all items fit freely between the augers.
Do not attempt to force oversize items or
packages into the spaces. Do not skip a
space. The bottom of the package should be
placed on the bottom of the compartment
above the product augers. The label should
face the front of the machine for easy
identification by the customer. See Figure
10.
Figure 10. Loading Products
NOTE
NOTE NOTE
NOTE
A10114