VendNet SM VI 3157, Service Manual

Page: 5 / 48

SM VI, 3157, 3158, 3159, P/N 4211051
3
UNPACKING
This vendor was thoroughly inspected before leaving the factory and the delivering
carrier has accepted responsibility for this vendor. Note any damage or irregularities at
the time of delivery and report them to the carrier. Request a written inspection report
from the claims inspector to file any claim for damage. File the claim with the carrier
(not the manufacturer) within 15 days after receipt of the machine.
Carefully remove outside packing material to avoid damage to the finish or exterior of
the machine. Remove adhesive residue with denatured alcohol or common household
vinegar.
Inspect the machine for concealed shipping damage. Report any damage hidden by the
shipping material directly to the delivering carrier on a hidden damage report.
Record the model number and serial number of the vendor for your records. These
numbers can be found on the Serial Plate on the rear of the cabinet and/or inside the
vendor. Refer to these numbers on all correspondence and inquiries pertaining to this
vendor.
WARNING
Use caution when tipping machine from pallet. Machine is heavy and can
fall causing serious injury. This may require a second person.
Remove the two (2) retaining blocks from the shipping pallet. See Figure 1. Slide the
vendor forward on the pallet until the front legs are clear of the pallet. See Figure 2. Tilt
the vendor to the front until the rear legs are clear of the palllet and remove the pallet.
See Figure 3. Turn the leg leveling screws in as far as possible. See Figure 4.
Figure 1. Retaining Blocks Figure 2. Slide Forward
Figure 3. Tilt to Clear Rear Legs Figure 4. Leg Levelers
A10721
A10722
A10723 A10724