PART 3 - Technical manual
34
DISMOUNTING, STORAGE AND REMOUNTING
Dismounting
VENDLET Standard may be dismounted and transferred to
another bed.
1. Remove the turning sheet and slide sheet.
2. Raise the VENDLET Standard bars to highest position.
3. Disconnect the power cable from the outlet.
4. Disconnect the cables from the control unit.
5. Dismount the control unit by cutting cable ties.
6. Now VENDLET Standard can be dismounted. Loosen the
bolts in the mounting plates and turn them aside to lift
VENDLET Standard off the bed frame. Optionally, use the
mounting trolley to transport VENDLET Standard to a new
destination.
Storage
Store VENDLET Standard in the original packaging until mount-
ing.
Indoor
0
+50
0° C (32° F) Min
+50° C (122° F) Max
20
90%
20–90% at 30°C
Keep dry
Remounting
Follow the procedure described in the section “Mounting” if
remounting is required.
Before remounting, you should check all parts of VENDLET
Standard for damage and that the date of the annual service
check has not been exceeded, and that VENDLET Standard has
been properly cleaned / disinfected.
Summary of Contents for STANDARD
Page 1: ...VALUE IN CARING MANUAL STANDARD...
Page 39: ......
