VENDAPIN DATATRON III SERIES 5882, Operator'S Manual

Page: 31 / 48

Typical Print/Datatron III Configuration:
Steering Mode Configuration #1 Example
Typical Copier Configuration: (i.e.: Black & White multi-functional copier/printer)
Paper Sizes (in copier trays):
•
Letter
•
Legal
Toner Types
•
Black & White
Copier Interface Signals:
Enable Signal from Datatron to Copier
•
Input enable line to copier to allow the copier to run (normally open relay contact closure)
Price Data Signals from Copier to Datatron
•
Vend pulse from copier to Datatron for all prices to Opto 1, indicating a copy has been
made.
•
Paper size selection is based on copier signal level to Datatron Opto 2.
o
Letter size selection (Pin 5 - 6 LOW or OFF)
o
Legal size selection (Pin 5 - 6 HIGH or ON)
9-Pin AMP Mate-n-Lok white connector pins on cable from back of Datatron III unit – connected
to copier interface paper size selection lines:
Enable Pins 1 & 2
Opto 1 Pins 3 & 4 – connected to vend pulse line
Opto 2 Pins 5 & 6 – connected to selection 1 line
Build matrix based on known selections as shown here for B & W copies only:
Opto 2 Paper Price Level Prices Notes
OFF Letter 1 0.10 Default to Letter
ON Legal 2 0.15 Legal