background image

English

- 50 - 

Mithos Programmable Thermostat User Manual

!NTIFREEZETEMPERATURE

 (only for winter operation)

s )TISPOSSIBLETOSETASAFETYTEMPERATUREVALUEANTIFREEZETEMPERATURE TOBE

maintained in case the programmable thermostat is deactivated. 

  

Field 

 

 will display the writing 

/&&

 and on field 

 

 the antifreeze 

temperature value currently set will flash.

  

Press 

the 

h

 and 

h

 keys to 

increase or decrease the temperature 
value. It is possible to choose a value 
between 01.0°C and 10.0°C. 

 

 It is also possible to disable the antifreeze 
function holding the 

"

"

 key until field 

 

displays the symbol 

"---"

. In this 

case, when the programmable thermostat 
is off, no regulation is executed.

4EMPERATUREMEASUREMENTUNIT

 

 It is possible to choose to display the temperature in degrees Celsius (°C) or 
Fahrenheit (°F).

  

Field 

 

 displays the writing 

D%'

 

and on field 

 

 the measurement unit 

currently set will flash.

  

Press 

the 

"

"

 or 

"

"

 keys indifferently 

to change the unit and 

" "

 to confirm.

%XTERNALPROBEPRESENCE

 

 The programmable thermostat allows to connect a remote external temperature 
probe for the displaying (and in case also regulation) of the temperature measured 
where the probe is placed.

Summary of Contents for VE312500



































Reviews: