English
- 15 -
Thermo GSM Digital Thermostat User Manual
The set value is added or subtracted to the
measured temperature.
Values range from -5.0°C to +5.0°C
Setting the external auxiliary input
The thermostat allows to connect a remote external temperature probe for the
displaying (and in case also regulation) of the measured temperature where the
probe is placed, or a non-voltage contact if an auxiliary device is connected (for
example, a gas detector, an anti-theft system, block detection boiler system, ...). In
this case, a change of the input status can be signalled by sending sms to a specific
number (for more further information, see
“GSM interface”
on page 21).
Field
(11)
dispalys the writing
“ ESt= ”
and on field
(16)
the selected option
starts flashing. Choose
“ °C ”
to connect
an external temperature probe or choose
“ DIG ”
to connect an auxiliary device.
If
“C”
is selected, when exit the menu,
the writing
“EXT”
appears on the display
(7)
followed by the temperature value
measured by the probe.
The characteristics of the probe are the
following:
• Degree of protection: IP66
• Cable length: 2 meters (extendable up to
40 meters with a bipolar
cable min section 1 mm
2
)
• Operating temperature: -40 °C ÷ +60 °C
Code
Model
Capacity
VN883500
X.Temp
-40 °C ÷ +60 °C
Summary of Contents for Thermo GSM Bianco VE715900
Page 1: ...Termostato Digitale Thermo GSM Manuale d Uso User Manual DIGITAL THERMOSTAT...
Page 2: ......
Page 38: ......
Page 39: ......
