English
- 9 -
Thermo GSM Digital Thermostat User Manual
INITIAL START-UP / RESET
•
Mount the thermostat to the wall, connect
the power supply, the output relay and the
external probe (if present) or external contact
to the rear terminals. Then fix the thermostat
to its base.
•
Insert a SIM card enabled for telephone
traffic into specific slot.
Attention: use only 3V SIM card and
standard GSM 11.12 phase 2+.
•
After the device is powered on, the
thermostat performs the initial start-up:
CLOCK SETTING
•
To set the clock and to switch ON/OFF the DST automatic time change, follow the steps
below:
- press the key
“ ”
for 3 seconds
until the second setting appears on the
display and starts flashing
- press keys
“ ”
and
“ ”
to set the
value and the key
“ ”
to confirm
- the sequence is: seconds, hours,
minutes, year, month, day, ON/OFF
automatic update of DST.
•
To exit the clock setting, press the key
“ ”
- the relay and all the display elements switch on for 3 seconds
- the relay and the display segments switch off.
When the start-up is completed, the display shows the measured temperature.
The thermostat starts to regulate (in heating mode).
Once the clock is set, the time of the thermostat is displayed on field
(11)
.
Summary of Contents for Thermo GSM Bianco VE715900
Page 1: ...Termostato Digitale Thermo GSM Manuale d Uso User Manual DIGITAL THERMOSTAT...
Page 2: ......
Page 38: ......
Page 39: ......
