Vemer KIROS, User Manual

Page: 18 / 32

English
- 16 -
KIROS Chronothermostat User Manual
TIMER MENU - TIMING SETTING
Initial screen Configuration menu TIMER menu
SET
3s
Set the date and time of timing end.
Increments of:
- 15 minutes (’) for timings up to 24 hours
- 1 hour (h) for timings from 1 to 5 days (d)
- 12 hours for timings from 5 to 99 days
x3 times
Set a timing to prolong the current operation for the duration of the timing itself.
There are 3 timings available:
•
Timed manual: set a timing during manual operation to maintain this operation
until timing has elapsed. At the end of the timing, the device activates the
automatic operation.
•
Timed automatic: set a timing during the automatic operation to maintain
this operation until the timing has elapsed.
At the end of the timing, the device activates the off operation
•
Off timed:
set a timing during off operation to maintain this operation until
timing has elapsed. At the end of the timing, the device activates automatic
or manual operation, depending on which operation was active before switching off.
How to set a timing
To exit the timing change:
• press the key once to return to the configuration menu
• press the key twice to exit the menu and return to the initial screen
When a timing is in progress, the symbol is lit.
Note: to cancel a timing in progress or to exit without activating the timing,
keep the key pressed until the display shows the current time.
Note: the timing ends in the case of changes to the operating mode.