VEMCO - VR2AR / VR2AR-X Manual
15 March 2019
48
6.7
Map Updating
Occasionally, VEMCO releases a new coded map. Updating the map in the VR2AR
is as simple as starting a new study with the new map selected. Follow the basic
steps below to start a study with the new map. More details on how to initialize the
receiver is found in section 3.9.1.
1.
Download the latest VUE software from
2.
Communicate with the VR2AR receiver (sections 3.3 and 3.4).
3.
Click the red and blue “Start Recording” button found in the Receiver tab’s
ribbon. If you have more than one receiver connected to VUE, then make
sure you have the tab of the desired receiver selected.
4.
Verify that the PC clock is correct. The receiver will be set to UTC time based on the current time of the
PC. The PC time
and the UTC offset
must be correct.
5.
Select to erase the old data and begin the study – only select this option if the data has already been
offloaded to the computer.
6.
Select “Show Advanced Settings” in the Study Configuration
window.
WARNING
Setting up a receiver
with an incorrect map
may result in no
detection data.
It is vital that the PC clock be correctly
set to your local time, including time
zone,
before the VR2AR is initialized
.
Retrieve all detection logs
before
the
VR2AR is initialized; receiver
’s memory
will be erased.
