VEMCO - VR2AR / VR2AR-X Manual
15 March 2019
12
Each receiver currently in communication with VUE has a tab at the top of the VUE window. This tab
identifies the type and serial number of the receiver. Click on a tab to bring it to the front of all the tabs,
making this receiver’s information visible.
The Receiver Tab
Receiver information
specific to this VR2AR
is contained in the
center of the window.
Receiver type (AR)
and serial number
The ribbon section contains tasks and
advanced options, including offloading
data, firmware upgrades, recording
(initializing) and ending communication.
A checkmark at “
Save to file
” will
begin a file to save all detections
received from that point forward.
The file name appears in the
Detection Monitor and the file is
saved to the selected directory
(see VUE user manual).
The received detections visible in
the Detection Monitor are not
automatically saved.
The
Detection Monitor
section displays detections
that are received by the
VR2AR while it is connected
to VUE. These detections
are saved in the VR2AR
memory. They can
immediately be saved to the
PC once “Save to File” is
selected (see box at right).
Selecting
“
Disable Timeout
”
will keep the VR2AR
“awake”
(
Bluetooth
communication is
active) until VUE is closed.
This is helpful when doing in-
air testing. Leaving the
Timeout in place (no
checkmark) allows the
Bluetooth
communication to
eventually timeout and close.
CAUTION:
Verify the receiver you are communicating with is
the intended unit
,
particularly before initializing and erasing receiver memory files, or data could
be lost. Communication can occur with any VR2AR with
Bluetooth®
wireless
technology activated within a 10 meter range (typical range in air).
