VEMCO - VR2AR / VR2AR-X Manual
15 March 2019
47
How to Update Firmware Using Manual Procedure:
If the automatic notification doesn’t appear, then you can manually update the
firmware. Before beginning, use Step 1 in the previous section to prepare for the
update. Once the preparations are completed, select “Install Firmware” on the
VR2AR tab. A window titled “Select Firmware File” will appear. Select the most
recent firmware file that matches your model of VR2AR. VUE software will not let
you install a firmware file for the incorrect model type. Click the “Open” button to
continue. The rest of the procedure matches the instructions found in Steps 2 – 5 in
the automated notification section.
Confirm that the VR2AR has updated to the new firmware
by checking that the firmware version number listed in the
Receiver tab is correct.
STEP 5
Verify that the Bluetooth Activator is
still in the receiver, or place it in the
receiver if it had been removed. This
is important as the VR2AR will require
it to be in place to re-establish
communication during the procedure.
STEP 3
Keep Bluetooth Activator in VR2AR!
Wait while the firmware is loaded into the VR2AR. The
status of the update is shown at the bottom of the screen.
Click “OK” when the firmware is installed (see below).
STEP 4
