VEMA MODULA PLUS 2, Use And Maintenance Instruction

Page: 19 / 50

Fixed washing plant MODULA PLUS 2
Draft Vema Srl
18
2
SAFETY
▪
Never wear ties or other swirling accessories.
▪
Never wear rings or bracelets that can be caught in parts of the machine.
In the handbook, when necessary, further recommendations relating to preventive measures,
personal protective equipment, instructions for preventing human error and prohibition relating to
any reasonably foreseeable misuse, will be provided.
The user can conveniently complement instructions provided by the manufacturer with additional
operating instructions, obviously not in conflict with those presented in this handbook, to contribute
to the safe use of the machine.
The manufacturer is not responsible for damage caused by the machine to people, animals or things
in case of:
▪
use of the machine by unskilled personnel;
▪
misuse of the machine;
▪
defects on electrical hydraulic or pneumatic power supply;
▪
improper installation;
▪
lack of maintenance;
▪
modifications or not authorized operations;
▪
use of spare parts not original or not suitable for the model;
▪
total or partial noncompliance with instructions;
▪
use not in compliance with specific national regulations;
▪
calamities and exceptional events.
General provisions
Moving parts must be always used according to manufacturer’s instr uctions, provided in the present
handbook. The handbook must be always available for the operator at the workstation.
Safety devices placed on moving parts to avoid accidents and achieve a high degree of safety cannot
be either modified or removed , but must be properly preserved.
The user must inform promptly the employer or the immediate superior about defects or malfunction
of the moving parts.
Checks and inspections
Inspections must be both visual and functional and carried out by skilled personnel in order to ensure
a safe use of the machine.
They include:
▪
test of all the bearing structures, which must not present cracks, breakages, damage,
deformation, corrosion, wear or changes compared to the original features;
▪
inspection of all mechanical parts;
▪
inspection of all safety measures installed on the machine;