J. Digital adjustments
56
Digital adjustments
COLOR
Power on/off
Turn on the fixture by switching on the power button. The light settings
always remain stored when the digital control is powered off.
By pushing the MODE button you can select either Color Temperature or
Dimmer adjustment.
The digital control enables to adjust the following light parameters
through its programmed CPU:
•Calibrated color temperature variation
•Stable color dimming
Color
temperature
variation
VELVET Power series includes a dedicated button to immediately set
3200K or 5600K.
Color temperature can also be increased or reduced through the /
buttons located at the digital control panel. The display indicates either
the selected color temperature or the dimming value.
When color temperature is selected a dot “.” appears between the two
digits value. The value 3.2 corresponds to 3200K and the value 3.3 to
3300K and so on.
Push the “ ” button to increase color temperature or push the “ “
button to decrease it. If you keep pushed any of the buttons you will
get a fast continuous variation. Every push on the buttons will increase
or decrease the color temperature in increments of 100 Kelvin.
IP54
Studio
