J. Digital adjustments
56
5.
Push “32K/56K” button to confirm the MASTER mode.
6.
A dot will permanently blink on the display reminding that the panel is
set as MASTER.
NOTES
Every time you switch off the power button the VELVET panels are
automatically set to SLAVE mode.
Only the first VELVET panel on the chain can be the Master. Every other
VELVET panels must be set on standard Slave mode and address at
channel 001.
The VELVET panel set as MASTER cannot control any other lighting
fixture out of VELVET Light, Power or Mini not even other articulated
products.
DMX RDM CONTROL
VELVET fixtures have been designed for a full bi-directional DMX RDM
control from the 5-pin DMX port located at the back of the fixture.
Once the DMX controller is powered ON a dot “.” appears in the right
down corner of the digital display as DMX operation status reminder.
Use DMX XLR-5 in&out splitter cables (ref. THE-VL-DMXinout) to daisy
chain several VELVET non STUDIO panels or mix them within any DMX
line of different fixtures.
IP54
Studio
