G. Placing into operation
43
STEP 2
Place the remaining nylon cap
(f)
and use the socket buton cap screw
(h)
again as an axis for the conical spring washer
(b)
, the thrust bearing
M8
(a)
and the yoke bushing
(i)
. Use the bottom hole to fix the wide
wing washer M8
(d)
and the U-Clamp piece
(c)
with the adjustable
knob.
STEP 3
Fit the the disk brake
(i)
with the disc caliper
(l)
and use the three
Philiphs countersunk head screws
(g)
to fix the disk brake to the LED
panel. Align the center of the disk brake and the center of the friction
washer
(j)
with the upper hole in the yoke.
(c)
(f)
(l) (a) (b)
(h)
(k)
Ref:
THE-2816CTUBE
IMPORTANT!
The convex face
is outside.
IP54
Studio
(i)
(m)
(j)
(g)