7
/
16
Installing Your Pedals
1)
Warning
: Incorrect installation will cause damage. Please read the instructions and watch our
videos if needed.
2)
Identify the Left and Right markings on the pedals. They can only be installed in their respective
side.
a.
L is for the Left Pedal and it goes on the Left Crank Arm.
b.
R is for the Right pedal and it goes on the Right Crank Arm (Chain Side).
3)
Sitting on your bike the pedals go on the Left and Right side respectively.
4)
Keep the pedal Horizontal while hand screwing to get the thread started. Then Use your 15mm
wrench to tighten them.
5)
Both pedals tighten towards the front of the bike. The left pedal is reverse threaded to allow this.
6)
The pedals need to be very tight (
at least
25-35N.m
torque)
, be sure to retighten after your
first couple rides.
Use your 15mm
wrench to properly
tighten the pedals
Right Pedal /
Chain Side
Left Pedal /
Key Side
Both pedals
tighten towards
the front
Rear
Front
