22
23
necessary to replace battery when the received
3.The maximum space between bicycle computer
and sensor should be 90cm, and the angle should
not be over 30
°
. The distance between magnet
and sensor should be no more than 5 mm.
4.Avoid draining the battery when you are not using the
computer, it is recommended to keep the
magnet away from the sensor.
5.Please do not use the product near a microwave
oven, TV, computer, mobile phone or any other
wireless device. The electromagnetic interference
from some devices can cause an inaccurate read out.
■
Trouble-shooting Guide
P roblem
C a us e
S olution
P roblem
C a us e
S olution
Re-install the computer
Re-install the battery
correctly or replace the
battery
No power in sensor
or computer
The computer
can not receive
any signal
Display inaccurate
speed and distance
Incorrect setting of
wheel circumference Re-set the circumference
away from that
interfering signal
Faulty speed
display
other strong signals
interfering
The chest belt is
too far from the
computer.
Incorrect wear of
chest belt
No power of chest
belt
Keep the distance between
the chest belt and computer
within 80cm.
Wear the chest belt as per
Replace the battery
No heart rate value
display when
monitor heart rate
Incorrect computer
installation position
signal is showing signs of loss.
For more information on Veloset products, support and distributors
please contact us at [email protected] You can find us on
Twitter, Facebook and our website at www.veloset.co.uk
Veloset Cycle Computers
PoBox 326
Manchester
England
M28 2YW
the instruction manual
