23
INTVL: Timed Interval
INTVL is the time between
exposures in the sequence.
You can select intervals from
0.1 seconds to 99 hours
59 minutes and 59.9 seconds.
If you are using a flash, be sure
to set an interval that is longer
than your flash recycle time.
1. Press the / arrows to
position the cursor beneath
INTVL
.
2. Press the
Set
button to
change the interval time
settings. The time increments
will blink.
3. Use the / arrows to
move between hours,
minutes, seconds, and tenths
of a second.
4. Use the / arrows to
change the time increments.
5. Press
Set
to confirm.
6. Press the
button to begin
the timer.