18
2. Press the transmitter’s
shutter release
button
halfway to focus your camera.
The LED will turn green.
3. For five exposures, press
the transmitter’s
shutter
release
button fully to
trigger your camera.
Note: Some cameras are limited
to only 3 exposures.
For continuous exposures,
press the
button to trigger
your camera. This will capture
up to 199 exposures. Press
the button again to end
continuous shooting.
Note: If you want to access your
camera’s fastest drive speed, with
the camera set to continuous
switch the transmitter to TIMER
mode and use the
shutter release
button to trigger the exposures.
B: Bulb
Captures an exposure with
full control over the length of
the exposure. Make sure your
camera is set to Bulb mode.
1. Press the
Mode
button until
the cursor is above the
B
on
the display panel.