background image

3

2. Tighten the red knob until the 

flash is secure.

1. Turn the red knob 

counterclockwise until the shoe 
mount is open wide enough to 
accommodate the flash.

3. Connect your flash to your 

camera with the appropriate 
sync cord for your model of flash 
and camera (not included). Sync 
cords can be obtained from your 
photo equipment dealer.

MOUNTING THE FLASH

The Vello Rotating Flash Bracket features an adjustable cold shoe.

FEATURES DIAGRAM

Locking Knob

Shoe Mount

Flash Rotating Arm

Mounting Plate

1/4

"

-20 Camera

Mounting Socket

Alignment Guide Mark

Upright Arm

Tripod 1/4

"

-20 Socket

2. To move from horizontal 

(landscape) to vertical (portrait) 
positioning, grasp the flash unit 
near the shoe mount and pull the 
rotating arm down clockwise.

3. At the same time, turn the camera 

to vertical orientation.

1. The Vello Rotating Flash Bracket 

allows you to hold your camera 
as you normally would, right 
hand holding the camera, ready 
to press the shutter button.

ROTATING THE FLASH

Thank you for choosing a Vello Rotating Flash Bracket. The Vello CB-300 
Rotating Flash Bracket accepts SLR and medium format cameras, allowing 
you to position a flash directly above the lens in horizontal or vertical 
orientation. The adjustable flash shoe is capable of accommodating almost 
any portable flash.

The bracket is all metal yet lightweight. It includes a cork pad to prevent 
the camera from slipping on the mount. The height of the upright arm of 
the bracket is adjustable. There is also a 1/4

"

-20 socket for tripod 

mounting. Integrated feet allow you to securely set your camera down 
mid-session. Please follow the instructions below to get the most out of 
your Vello Rotating Flash Bracket.

INTRODUCTION

Summary of Contents for CB-300









Reviews: