4
2. Before tightening the mounting
knob, make certain that the
camera is flush against the
retaining lip of the plate.
1. Mount the camera to the plate
by screwing the mounting knob
into your camera's tripod socket.
2. Adjust the bracket's position. The
center of the lens should align with
the shaped hole in the bracket.
1. Loosen the two screws on the
side of the upright arm.
3. Retighten the screws. The flash
will now be centered above the
lens when you switch to a
vertical orientation.
The top plate can be removed if necessary to accommodate certain models of
larger cameras. Use a screwdriver to remove the screw holding the plate to
the bracket.
TO MOUNT THE CAMERA
ADJUSTING THE UPRIGHT ARM
The upright bracket can be adjusted to properly center the flash unit
and to accommodate larger cameras.
