42
HPS50 PersonalScope
TM
Markers
Fig 34
1
2
Determining the frequency of a signal requires
the measurement of a period. The easiest way to
do this would be by placing the vertical markers
either on two consecutive peaks or two identical
slopes of a signal.
1. Press the “Marker 1-2”-key to view, select or
hide the markers.
(1)
2. Press the cursur keys to move the markers.
(2)
Notes:
•
By pressing the
‘Marker 1-2’
-key, you
select between marker 1 or 2. The screen
shifts automatically until the selected time
marker is on screen.
•
At
dynamic
display mode (see display set-
up), the best display layout is chosen
depending the use of time markers or voltage
markers.
•
Some meter readouts are replaced by the
marker readouts.
•
Depending on the chosen display layout, not
all of the marker readouts can be displayed
at the same time.
•
Removing the markers from the screen can
be done by repeatedly pressing the
‘Marker
1-2’
-key or by a short press of the
‘Display’
-
key and using the up/down cursor keys.
