36
HPS50 PersonalScope
TM
Fig 29
Notes:
•
If the signal goes off-screen or when the
signal is too small for measurement, the
readout will show
??? (see fig 28)
•
For all AC measurements: Make sure that at
least one or two periods are displayed or
select the auto-setup function.
•
You can choose
“none”
to hide readouts.
•
Depending on the selected screen layout
one to four different meter readouts can be
displayed.
•
At 1s/div timebase or slower, the readouts
are forced to the instant information.
‘Vs’ (Fig. 29)
.
•
If no key is pressed during 10 seconds, the
unit returns to its previous operating mode
and the cursorkeys are set for changing the
timebase and sensitivity.
Fig 28
Meter readout