13
The K8039 consists of 2 internal parts: a low-voltage part taking care of the DMX decoding and a high-
voltage part controlling the lamp. You can test the latter part with the self-testing function
Make sure the PCB is not live!
Close the “mode” jumper, JP2 by means of a shunt.
Set the DMX address to 0, i.e. all switches to “OFF”.
Connect a light bulb (min 60W) with the output (LAMP OUT).
Switch on the K8039 (AC IN)
The light bulb should slowly fade in and out.
Remove the power and shunt JP2.
26. Stand-alone test
Stand-alone test
AC POWER
ADDRESS
0
