HAMPAG
- 2 -
VELLEMAN
c.
Switching the pager on/off
•
Press
●●●
for 2 seconds to switch the pager on.
•
To switch the pager off, press
►
until PGR OFF appears on the display.
d.
Display Readout
ON: pager is in ON position
Err: wrong message
RP: repeat message
Lock: message is being blocked
Battery: low-battery indication
Clock: indication set-up time
Bell: sound mode, the vibrating function is activated when this symbol does not appear on the display
Antenna: out of range
Arrow: message not complete, press button to read next page
e.
Backlight
•
Press
◄
to switch on the backlight, press again to switch it off.
f.
Messages
•
Receiving a message
o
The pager vibrates en bleeps when receiving a message. When a message is not read within 8
seconds, UNREAD 1 appears on the display.
o
The pager will repeat an unread message every 2 minutes.
o
The pager will simultaneously vibrate and bleep for urgent messages, regardless of which ALERT
setting is programmed.
•
Reading a message
o
Press
●●●
. A number of messages appear on the display.
o
Press
●●●
again. The messages are shown one at the time. Press
●●●
to read the next message. A
message can be 4 screens long.
•
Deleting a message
o
Press
►
until LOCK and DELETE appear on the display.
o
When DELETE appears on the display, press
●●●
. Press
●●●
for 1 second to delete all the
messages.
g.
Function menu
•
Press
►
in the STANDBY mode: ALERT SETTING – TIME – DATE – ALARM CLOCK – MELODY –
DELALL (when there are memorised messages) - POWER OFF.
h.
Message Signal
•
Press
►
until ALERT SETTING appears on the display.
•
Choose SOUND or SILENT mode with the
●●●
button (SOUND: message through bleep, SILENT:
message through vibrating function).
i.
Sound
•
Press
►
until MELODY appears on the display.
•
Press
●●●
. TONE 1 appears on the display.
