CTC1000
V. 04 – 11/02/2016
11
©Velleman nv
2.
Press OK again.
7.6
Duress Code
Use
•
Can be used to arm or disarm the alarm system.
•
Entering the code when under duress from an assailant triggers a silent alarm and
sends a secret message to the programmed mobile phones.
•
No siren will sound for duress alarm.
Default value
•
Not set
Properties
•
4 digits
•
Optional
•
Will be cleared when resetting the system (see chapter System reset)
To set a duress code
1.
To access the menu item: enter Program mode, go to Gen. Settings, select Duress Code and press OK.
2.
Key in a 4 digit code and press OK.
3.
Repeat the code and press OK.
To change a duress code
1.
To access the menu item: enter Program mode, go to Gen. Settings, select Duress Code and press OK.
2.
Press
.
3.
Key in a 4 digit code and press OK.
4.
Repeat the code and press OK.
To delete a duress code
1.
To access the menu item: enter Program mode, go to Gen. Settings, select Duress Code and press OK.
2.
Press OK again.
7.7
Master Code
Use
•
Required together with the pin code to enter the device’s Program mode.
Default value
•
1111
Properties
•
4 digits
•
Mandatory
•
Cannot be deleted
•
Will be reset to default when resetting the system (see chapter System reset)
•
The master code needs to be different from the pin codes
