![background image](http://html1.mh-extra.com/html/velleman/ctc1000/ctc1000_user-manual_4095568014.webp)
CTC1000
V. 04 – 11/02/2016
14
©Velleman nv
7.14
Date
The option Date allows setting the current date.
1.
To access this menu item: enter Program mode, go to Gen. Settings, select Date and press OK.
2.
Use the up and down arrows to set the month and press OK.
3.
Use the up and down arrows to set the day and press OK.
7.15
Panel Siren
The option Panel Siren allows setting the siren on the control panel to on or off when an alarm event occurs.
1.
To access this menu item: enter Program mode, go to Gen. Settings, select Panel Siren and press OK.
2.
Use the up and down arrows to select the option and press OK.
8.
Special Settings
To access the items from the Spc. Settings menu:
Enter Program mode and go to Spc. Settings.
Alarm Length
Sets the length of the built-in siren when an alarm is activated.
Available options are: Disable (no alarm will be set) and 1 to 15 minutes.
System default is 3 minutes.
Notes
•
If Disable is selected, when the control panel receives an alarm signal, the panel siren and internal &
external sirens will not raise an alarm sound.
•
If the outdoor siren alarm length is longer than the control panel’s, the system gives priority to the control
panel. (for example when the siren’s alarm length is set to 3 minutes and the panel’s alarm length is set to
1 minute, both alarm siren stop at 1 minute; however, the outdoor siren’s LED keeps flashing for 3
minutes.