![background image](http://html1.mh-extra.com/html/velleman/cctvprom18/cctvprom18_quick-installation-manual_4091992004.webp)
CCTVPROM18
V. 02.1 – 30/01/2014
4
©Velleman nv
Not included:
hard disk: HD500GB/S, HD1TB/S & HD2TB/S
VGA & DVI monitor: MONSCA4N1
computer mouse.
5.
Overview
Refer to the illustrations on page 2 of this manual.
Front panel
LED indications
HDD
Reading or recording activities on the hard disk.
ALARM
An alarm was triggered.
TIMER
Timed recording is enabled.
PLAY
The DVR is in playing mode.
POWER
DVR power is on.
Navigation
button
In settings mode:
Press
▲
/
▼
/
◄
/
►
to move the cursor accordingly.
When changing a setting, press + or – to increase or decrease the setting.
In playback mode:
Press
to pause playback.
Press
to stop playback.
Press
to fast forward.
Press
to fast rewind.
MENU
Press to enter the main menu.
ENTER
Press to confirm settings.
LIST
List the information of the recorded files.
QUICK SEARCH / RECORD / MOTION / ALARM / TIMER / FULL LIST
PLAY
Press to play the recorded video.
SLOW
In playback mode, press to play the recorded file slowly.
ZOOM
In live or playback mode, press to enlarge the image of the selected channel.
SEQ
Press to show all screens sequentially in full screen mode. Press again to quit.
4CH: Press to show the 4 channel display mode.
1–4
Press a button to select the corresponding channel.
AUDIO
= SLOW + ZOOM
Press SLOW and ZOOM simultaneously to select live or play-back sounds.
P.T.Z.
= SEQ +
Press SLOW and
simultaneously to enter or exit PTZ control mode.
SEARCH
Opens the QUICK SEARCH function.
USB port (2 x) Connect a USB flash drive for video backup to one USB port; connect a USB mouse to the other.
Note:
do not connect two USB flash drives or USB mice at the same time.
Rear panel
LAN port
Connect the DVR to a local network by plugging a network cable into this port.
VGA
Connector for video monitor (not included).
AUDIO IN
4 audio input channels to connect four external audio sources, e.g. from cameras with audio.
AUDIO OUT
1 audio output to connect to an audio device, e.g. a speaker (mono).
VIDEO IN
4 video input channels to connect 4 external video sources, e.g. cameras.
HDMI
1 video output channel to connect the DVR to the main monitor.
EXTERNAL I/O
Use a 9-pin DSUB connector to connect external signals, e.g. alarm, PTZ…
19V DC
Power supply input