9
Calibrate
Makes the oscilloscope calibration and saves the calibration values to the PCSU01.INI file.
This option performs following operations:
1. The fine adjustment of the trace Y-position (offset) on different Volt/Div and Time/Div scales.
2. Sets the trace labels (on the left side of the screen) to correspond the trace GND level.
3. Sets the triggering level mark to correspond the triggering level.
Save/Recall Last Oscilloscope Settings
Saves the oscilloscope settings at program exit and restores the settings when the program is next time run.
View menu
RMS value
Displays AC RMS value of the signal
dBm Value
Displays AC dBm value of the signal
Sample Rate
Displays the sampling rate on the top of the screen.
Waveform Parameters
Software automatically calculates various voltage and time parameters of a signal, such as DC mean,
amplitude, rise time etc.
These parameters are displayed in a separate window. Use the check boxes in the window to select the
parameters you which to be displayed.
Markers
Displays Markers on the screen.
Bright Grid
Brightens the signal grid on the screen.
Dot Join
On: The dots of the acquired waveform data are connected by lines.
Off: Only the dots of the acquired waveform data are displayed.
Clear Display on Run/Single Click
The old traces are cleared when Run or Single button is pressed.
This makes it easier to see the data update on the screen.
Infinite Persistence
Select Infinite Persistence mode.
Color Graded Persistence
Select Color Graded Persistence mode.
Variable Persistence
Select Variable Persistence mode
Help Menu
Oscilloscope Help
Displays the help file
About
Displays information of the program version