![background image](http://html1.mh-extra.com/html/velleman/5410329646165/5410329646165_user-manual_862914008.webp)
8
Exit
Terminates the program.
Restore Default Settings & Exit
Use this option to restore all values to their default factory settings.
The calibration values will be reset.
Use this option if the oscilloscope's calibration fails repeatedly.
Note: Software reinstallation does not reset the oscilloscope settings - you have to use this menu option to
restore default settings.
Edit menu
Copy
Copies the image to the Windows' clipboard.
Paste
Pastes the image residing in Windows' clipboard to the screen.
Options menu
FFT Window
Set the window function used to taper the original signal before calculating the FFT.
FFT Options
- Maximum
Maximum value of each frequency is displayed in Run mode.
- RMS Average
Use this averaging mode to reduce signal fluctuations.
- Vector Average
Use this averaging mode to reduce random or uncorrelated noise in the synchronous signal you want to
display.
Hardware setup
Select the hardware.
Colors
Select the display colors.
Skins
Give the software a new look by applying a different skin.
Persistence Options
Select the persistence settings.
Trigger Options
- Noise Reject
Select this option to get stable triggering on noisy signals.
This option works only in the Run mode and only in the Real-time Sampling mode.
Average
The Average mode can be used to remove random noise from the waveform and to improve measurement
accuracy at the cost of slower display response.
The averaged waveform is a running average over a specified number of acquisitions.
Averages selectable from 2, 4, 8, 16, 32, 64 and 128.