Velkase VELKA 5 User Manual Download

Page: 1 / 24

2/NOV/2020

VELKA 5

Rev 2.0

USER MANUAL

................................................................................................................................................. 2

Hardware compatibility

............................................................................................................................. 3

Summary of assembly steps

....................................................................................................................... 4

Disassembly

................................................................................................................................................. 5

Motherboard, CPU, cooler, memory, riser installation

.......................................................................... 6

Graphics card installation

........................................................................................................................ 10

Display cable extensions

.......................................................................................................................... 12

Installation into the main body

............................................................................................................... 14

2.5” drive (dedicated mount)

.................................................................................................................. 16

Additional 2.5” drives

.............................................................................................................................. 17

Power supply

............................................................................................................................................. 18

Front struts

................................................................................................................................................ 20

Power button

............................................................................................................................................. 21

Side panels

................................................................................................................................................. 22

Front panel

................................................................................................................................................ 24

Summary of Contents for VELKA 5

























Search results

Summary of Contents for VELKA 5

Reviews:

Related manuals for VELKA 5

Brands by name

Popular brands

Velkase VELKA 5, User Manual

Search results

Summary of Contents for VELKA 5

Reviews:

Related manuals for VELKA 5

Brands by name

Popular brands