Vela Argus 2000-0370-2 Developer'S Manual Download Page 144

Page: 144 / 153

136

Argus Encoder Family Version 2.6 API Developer’s Guide

Filter Manager Error/Status Codes

-527

The call to Stop WMF failed.

Component may be “hung
up.” Try resetting. If that
fails, application may need
to be restarted.

-528

An attempt was made to reset the WMF compo-
nent when it was not installed.

See if the Registry shows
the WMF component turned
ON even though WMF is not
installed or licensed on this
system.

-532

Video Bit Rate setting for Windows Media
Format Component is out of range.

The number specified for
video bit rate in the WMF
Registry key is not valid.

-533

Filename setting for Windows Media Format
Component is not valid.

Filename must be set to
something other than NULL
when attempting a WMF
Encode.

-534

Audio Profile Index setting for Windows Media
Format Component is out of range.

The Audio profile index set
in the WMF Registry key is
invalid.

-535

Video Frame Rate setting for Windows Media
Format Component is out of range.

The Video Frame Rate in the
WMF Registry key is invalid.

-536

Video codec setting for Windows Media Format
Component is out of range.

The Video codec Setting in
the WMF Registry key is
invalid.

-537

Video Quality setting for Windows Media Format
Component is out of range.

The Video Quality Setting in
the WMF Registry key is
invalid.

-540

There was an error creating an instance of the
VelaAsfWriter COM object.

Verify that the WMF Argus
Spectrum Component has
been installed correctly.

-541

Error marshalling data into WMF thread
(for callbacks).

Filter Manager Error/Status Codes (Continued)

Error Code

Meaning

Comments

Table C-1. Filter Manager Error/Status Codes (Continued)

Summary of Contents for Argus 2000-0370-2


























































































































































Search results

Summary of Contents for Argus 2000-0370-2

Reviews:

Related manuals for Argus 2000-0370-2

Brands by name

Popular brands

Vela Argus 2000-0370-2, Developer'S Manual

Search results

Summary of Contents for Argus 2000-0370-2

Reviews:

Related manuals for Argus 2000-0370-2

Brands by name

Popular brands