Vela Argus 2000-0370-2 Developer'S Manual Download Page 148

Page: 148 / 153

140

Argus Encoder Family Version 2.6 API Developer’s Guide

Filter Manager Error/Status Codes

-625

VSP reset failed. Unable to reset encoder.

-626

VSP unmap failed.

-627

Unable to create mutexes for FTP component

-628

Unable to create FTP COM object.

Make certain that the
RemoteStore component
is registered.

-629

Error initializing RemoteStore component.

-630

Error resetting RemoteStore component.

-700

Attempted to cue Real component when it was
already cued.

State problem. May need to
restart application.

-704

Attempted to start Real when it was already
playing.

State problem. May need to
restart application.

-707

The call to stop Real failed.

Component may be “hung
up.” Try resetting. If that
fails, application may need
to be restarted.

-708

An attempt was made to reset the Real compo-
nent when it was not installed. or a call to reset
failed.

See if the Registry shows
the Real component turned
ON even though Real is not
installed or licensed on this
system.

-710

Failure to create one of two Real mutexes.

Check open handles using
Task Manager.

-711

Error marshalling data into Real thread
(for callbacks).

-712

Error marshalling data into Real thread
(for callbacks).

Filter Manager Error/Status Codes (Continued)

Error Code

Meaning

Comments

Table C-1. Filter Manager Error/Status Codes (Continued)

Summary of Contents for Argus 2000-0370-2


























































































































































Search results

Summary of Contents for Argus 2000-0370-2

Reviews:

Related manuals for Argus 2000-0370-2

Brands by name

Popular brands

Vela Argus 2000-0370-2, Developer'S Manual

Search results

Summary of Contents for Argus 2000-0370-2

Reviews:

Related manuals for Argus 2000-0370-2

Brands by name

Popular brands