Visit us at vekerr.com
will be saved.
Setting the Date
1.
Press the MODE button twice, then hold the button for 2 seconds to set the Date. The default date is set to January
1, 2018.
Set the date using the UP/DOWN buttons. A quick press of either button will increase or decrease the number
by 1. To increase or decrease the number faster, press and hold the UP/DOWN buttons.
2.
Once in Date mode, press MODE to switch between the date functions: Year
→
month
→
day
→
exit
•
The Year can be set to 2009 – 2099; the Month can be set from 1 – 12; the Day can be set from 1 - 31
•
The system will exit Date mode if no button is touched for more than 10 seconds. The currently set date
will be saved.
Setting the Display Mode
1.
Press the MODE button until the Temperature mode displays.
2.
Press and hold the MODE button until you hear a beep.
3.
Choose to display Date/Time or cycle through Date, Time, and Temperature.
For the cycling mode, the Time displays for 10s; the Date and Temperature each display for 3s.
4.
To exit Display mode, hold the MODE button until there is a beep. The normal time will then display.
Setting the Alarm/Snooze
1.
In any mode, press the ALARM button to display the alarm mode.
2.
In the alarm mode, press the ALARM button to turn the alarm On/Off.
3.
In any mode, press and hold the ALARM button for 2s to set the Alarm.
4.
Once in Alarm mode, press MODE to switch between the alarm functions: hour
→
minute
→
select alarm
alerting mode (B1/SH/BS)
→
snooze time
→
select working day alarm (1-7/1-6/1-5)
→
exit
Setting the Alarm Time
•
The hour can be set from 1 - 12 or 0 – 23, depending on 12/24-hour mode.
•
Minutes can be set from 00 – 59.
Alarm Alerting mode (B1/SH/BS)
⚫
B1: normal beep sound mode ;
⚫
SH: vibration mode;
⚫
BS: both beep sound and vibration mode
Snooze Time Interval
•
Set the snooze time from 0 - 60 minutes, default 5 minutes
The system will exit Alarm mode if no button is pressed for 10 seconds. The currently set alarm will be saved.
Operating the Alarm/Snooze
1.
When the alarm rings, Alarm mode is entered. The sound of "Drips" is made, starting slowly then gradually
getting faster. At the same time, the alarm sign flashes. The LED shows the alarm time when the alarm is ringing
and the current time when it stops.
Stop the Alarm
•
Press any button to stop the alarm. If there is no intervention, the alarm will continue for 1 minute,
then stop. However, the alarm sign will not disappear.
Snooze the Alarm
•
When the alarm sounds, press the SNOOZE button to pause the alarm; the alarm sign flashes. During
