Visit us at vekerr.com
the snooze interval, press any button to turn off the snooze; pressing the SNOOZE/LIGHT button does
not affect the snooze.
•
While the alarm is sounding, the LED shows the alarm time; once it stops sounding, the LED displays
the current time.
Temperature Mode
1.
The Temperature feature automatically detects the current ambient temperature every 15s. The measurement
range is between 10℃ and 50℃(14F
～
122F).
2.
Temperatures detected below -10
°
C display as -10
°
C, above 50
°
C display as 50
°
C
3.
Press the MODE button three times, then hold the button for 2 seconds to set the Temperature mode.
4.
In Temperature mode, press the DOWN button to switch between Celsius and Fahrenheit.
5.
Switch to LED to display the Time, Date, and Temperature in cycles. The Time is displayed for 10 seconds.
The Date and Temperature are displayed for 3 seconds each.
6.
Press and hold the MODE button until there is a beep. The normal time will display.
Power saving function
1.
When operating on battery power, the screen will automatically turn off after 16s of no button press and go into
power saving mode. All normal timing and temperature settings are saved.
2.
When operating using the DC power supply, the screen is always lit and bright.
3.
When in Power saving mode, the LED display is off. Press any button to turn on the LED display and display
the time.
4.
When in Power saving mode and the alarm sounds, the LED display is automatically turned on.
Night mode
1.
In Time, Date, or Temperature mode, press the UP button to adjust the brightness. The default setting is
bright.
2.
In Time mode, press the MODE button three times to enter the night setting mode. Press the UP or DOWN
button to turn on/off the night mode (night mode is turned off by default).
3.
When night mode is ON, the default setting is half-bright from 18:00 to 6:00, or 6 PM to 6 AM.
4.
When night mode is ON, press and hold the MODE button for 2 seconds to enter the night mode setting.
Press MODE to switch between the time functions: start time → start minute → end time → end minute
5.
The start time is displayed as XX:XX, and the end time is displayed as X:XX.
6.
In the power saving mode, press any button to turn on the LED display. It will display for 16 seconds.
Nighttime anti-disturbance function
1.
When the anti-disturbance feature is off, and the LED display is off, press any button to turn it on.
2.
If the LED display is on, you can press and hold the SNOOZE/LIGHT button to turn it off to avoid disturbing
others during the night.
Questions?
Visit us at vekerr.com
Email us at [email protected]
