Veilux VPIP-D110X / VPIPI-D110X
User’s Guide
Website: www.Veilux.net Phone # 1-800-510-6528
(April 2011)
47
from Veilux‟s home page.
Refer to
[6.4
.
How To Upgrade Your Veilux VPIP-D110X / VPIPI-
D110X System]
.
Bootloader
Upgrade
Upgrade the bootloader installed in the network camera via the network.
Bootloader needed for the upgrade
can be downloaded from Veilux‟s
home page.
Refer to
[6.4
.
How to upgrade Veilux VPIP-D110X / VPIPI-D110X
firmware]
Add PTZ File
Not applicable for Veilux VPIP-D110X / VPIPI-D110X
Factory
Default Setting
Re-initialize the network camera to factory default state.
By checking on a Radio button “Except Network Configuration”, you can
preserve the parameters for the network. Checking on “All”, will return all
the parameters to factory default state.
Once Veilux VPIP-D110X / VPIPI-D110X are re-initialized as factory
default state, it should be set-up again using IP-Installer.
System Reset
Perform remote reset by clicking the “CONFIRM” button.
All previous connections will be disconnected upon reset. Veilux
VPIP-D110X / VPIPI-D110X do not resume the connections and the
users must re-connect to the server manually.
