SVEX-W125-3 (Ex) Explosion proof PTZ Camera Manual
Book
Ver: 2.3
3. INSTALLATION
3.1 Caution
Please carefully check before installation
a. If there is ex-marking license
b. The ex-marking satisfy environment use
c. All ex-proof and flameproof parts are complete enough for structure
d. Inside and outside earth are ready
Stop immediately while there is any unconformity
3.2 Pole Mounting
SVEX-W125-3
Mount base
pole
Camera
cable
Junction Box
Fix here
Cable out
hole
Junction box
Cable out
concrete
bolt
P4. mount camera and connect cable
P3. make the concrete and install a pole
As shown in Picture 2 and 4 make the camera bottom
Make concrete base before install pole and
previously lay screws and some holes for cable out
under the base. Attention: Pole
‟s type shall
changes according to monitoring scope, wind
speed and height. So please consult the supplier
while design the pole
cable through Cable Laid-in hole. The Junction
Box normally locates at a easy installation
and
maintenance level with screw fixed, and must
be with ex-proof tube for protection or with armored
cable
