Veigel BHA00005, Installation Manual

Page: 26 / 32

5-14
INSTALLATION
TRANSFERRING THE KIT
Before transferring, check the unit for wear and tear. If there are damaged
or worn out parts, replace them with original parts which can be ordered
from Veigel.
When ordering parts, please state serial number of the product.
•
•
ACHTUNG!
DE-INSTALLATION
• de-installation is done in reverse order.
• carefully plug and seal all drill holes.
ACHTUNG!
Check all screw joints for tightness.
FINAL CECK (CLASSIC AND COMPACT)
Check linkage and hand control for free movement, in particular for unhindered
movement near steering wheel and dashboard.
Operate brake and accelerator repeatedly and vigorously. This will allow the
connectors to settle. Check adjustment afterwards and re-adjust if necessary.
After 1000 km (appr. 600 miles) check all screw joints. in particular the joints
to the pedal arms.
Check functions of hand control:
- in the workshop
- during a test drive
Note: no fixtures for cell phones etc. must be installed to the left of the centre
hump, as they may get in the way of the hand contro!
ACHTUNG!
ACHTUNG!
Carefully check neutral position of brake pedal, while engine is running!
The weight of brake connector and linkage may lead to involuntary and
imperceptible operation of the brakes.
Check before the first drive, if that is the case. If so, please contact us immedia-
tely. Do not drive the car before connector and linkage have been removed!
ACHTUNG!