Veichi VH600, Manual, Page: 11 / 29

-10-
125 max. slaves support disabling and scanning
Ethernet
Two Ethernet ports share a network board and an IP
address, supports network switching
EtherNet/IP master/slave: when act as a master, it
supports 16 slaves; when act as a slave, it supports 16
masters
Modb μ s-TCP master/slave: when act as a master, it
supports 63 slaves; when act as a slave, it supports 16
masters
OPC-UA server with 16 clients
TCP/UDP free protocol for 16 connections
RS485
Up to 3 channels(1 channel on the main unit and 2
channels can be expanded by the expansion board)
Hardware interface: 2 × 4 PIN terminal (common
terminal with power supply)
Isolation: Isolated
Terminal resistance: YES
Slave qty: Up to 31 Modbus-RTU slaves
Communication baud rate: 9600bit/s, 19200bit/s,
38400bit/s, 57600bit/s, and 115200bit/s
Short circuit protection: YES
Serial port free protocol
CAN
CANopen master: 1 channel of CANopen master can
be expanded with up to 30 slaves
USB NO
High speed IO
Pulse input 8 channels of 200K high speed input
Pulse output 8 channels of 200K high speed output
User program
upgrade
Ethernet Program upload/download
TF card Under way
Firmware
upgrade
TF card For firmware upgrade
Dimension and
Weight
Dimension (Length
× Width × Height)
(mm)
100 × 53 × 80
Weight -
1.3.2 Power Specification
Item Specification
Terminal input power rated voltage 24V DC ± 10% (21.6V DC ~ 26.4V DC)
Terminal input power rated current 1.6A (Max at 24V DC)
Bus output power rated voltage 5V DC (4.75V DC ~ 5.25V DC)