SETUP GUIDE
3
Adjust Handlebar Height
Tighten Handlebars
4
Tighten the quick release lever
to lock the handlebars in place. Yo u
may need to adjust the tensioner nut
on the quick release lever to hold the
handlebar firmly in position. Check
for proper tightness by holding the
front wheel stationary in between
your feet while wiggling the handle-
bars. If the handlebars are loose,
open the quick release lever, tighten
the tensioner nut, close the quick
release lever and check again for
t i g h t n e s s .
P r e s s
the small sil-
ver button
while insert-
ing the han-
dlebar into
the steer tube.
Make sure the
silver button
is locked into
one of the four
preset height
s e t t i n g s .
•Tensioner
Nut
SX600 Manual 1/1/04 12:44 AM Page 5